machine for pellets of two series

As we all know, particle machine divided into two series - Series with flat die ring mold series.
Everyone should be familiar ring nmb machine pellet, because in many domestic and foreign enterprises are using a ring mold feed granulator. Because do feed raw materials are refined, such as corn, soybean meal, cottonseed meal, etc., bonding rate, another former granulation quenched with steam, you can forage briquetting machine
Play a softening of the material in advance, cured, thereby better granulation and increased gloss particles. But like straw, wood chips and other crude fiber, low adhesion itself, difficult to shape, and if used as pellet mill machine, the need for high density, so they need a lot of pressure to achieve the density of the particles, which invisibly increase the difficulty. Renewable energy in recent years gradually rise, the market is being promoted as a fuel particles are ring die pellet mill to do feed evolved from the ring mold machine, so there are still many shortcomings to us to improve.

machine for pellets materials ready to clean up

First, the use of pressure roller cone and the inner ends of the mold plate, consistent with the outer wire-speed, machine for pellets and die does not appear
   SZLH508E grade pellet mill
Dislocation friction reducing drag, reducing the kinetic energy loss, prolonged life of the mold, lower production costs.
Second, observe the granulation nmb pellet machine with three doors, materials ready to clean, easy maintenance.
Third, the pressure roller set uniform, smooth operation, while increasing the suppression area, improve production efficiency.
Fourth, the use of spiral stalk central regulator structure, die big gap with the small, adapt to different materials to ensure the suppression effect.

A plurality of machine for pellets roller granulator

Series granulators in the country is generally divided into two or more nmb pelletizing machine roller pressure roller granulator, mainly applied to make organic fertilizer granulation. As for fuel particles, although you can also do it, but a lot of wear and tear on the machine, thereby raising the cost, so do not apply. To address this problem, learn from foreign advanced technology, based on the country developed a pressure roller cone particle machine, there are different following the machine with two press wheel series:
The models used oblique machine for pellets wheel. And both ends of the mold plate, consistent with the outer wire-speed, there are no dislocation friction wheel and die, reducing drag, reducing the kinetic energy loss, extending the life of the mold, which is a major difference with similar compression molding equipment. Meanwhile, the technology is very advanced technology of today.

machine for pellets of two series

As we all know, nmb machine pellet divided into two series - Series with flat die ring mold series.
Everyone should be familiar ring mold series, because in many domestic and foreign enterprises are using a ring mold feed granulator. Because do feed raw materials are refined, such as corn, soybean meal, cottonseed meal, etc., bonding rate, another former granulation quenched with steam, you can forage briquetting machine
Play a softening of the material in advance, cured, thereby better granulation and increased gloss particles. But like straw, feed mill plant and other crude fiber, low adhesion itself, difficult to shape, and if used as fuel particles, the need for high density, so they need a lot of pressure to achieve the density of the particles, which invisibly increase the difficulty. Renewable energy in recent years gradually rise, the market is being promoted as a fuel particles are ring die pellet mill to do feed evolved from the ring mold machine, so there are still many shortcomings to us to improve.

Characteristics of wood machine for pellets

Standard fuel = fuel stabilizer
Reducing the moisture content of <(10%) to improve combustion efficiency
Reducing smoke and nmb pellet mill emissions
Increased density (sawdust for example 200KG / M to 650KG / M)
Reduce transportation costs
Reduce storage space
Easy to control and convenient operation
Belonging to low-carbon fuels
High hydrogen pelleting machine, high volatile, easy to burn
High oxygen content, easy to burn and burn, the amount of carbon in the ash residues rarely
Low sulfur content, do not set the combustion gas desulfurization equipment, reduces costs, but also conducive to environmental protection
Burner exhaust gas temperature is low, efficiency
Low ash content ...... (words unchanged)
Calorific 3800-4800K/CAL/KG, and the quality of the coal is quite
Belongs to renewable energy, alternative fossil fuels, reduce greenhouse gas emissions