Feed mill manufacturing and inspection requirements

 A rotor mill hammer mill shall SB/T10117 standard requirements do Briquette machine check. 2 hammer mill hammer two diametrically opposed total

Poor quality may not exceed 5g, jaw crusher flat teeth in the same group should meet JB/T6270-1992 weight difference in 342 requirements. 3 All moving parts should be

Rotation flexibility, without jamming and grazing phenomenon. Rotor hammer, under its own weight, should be able to freely rotate around the pin. 4 protective cover, steering mechanism

The handle should be painted with eye-catching and different from the oil equipment of paint mill.

Dangerous place should be marked as specified in GB2893. 5 mill dust concentration in the working area is not

More than 10mg/m3. 6 product label shall be marked with at least the following: - Product name; - standard number; - Model; - manufacturing units

Name; - Matching power; - Spindle speed; - date of manufacture.