2013年7月17日星期三

Oil press tips

oil processing normal operation, the high oil content of fuel oil are mostly concentrated in the former group of rows and rows of round place. Department of rows out of fuel oil accounts for about 60% of the total, the former

Group round row at about 30%; while the end of the discharged oil is small, not a line into droplets, oil color is very clear. Can be repeated two or three times virgin rapeseed or soy Youzha do,

During this period more diesel oil can be uniformly doped materials embryo crushing, cutting to remain uniform, avoid erratic, otherwise it will affect the oil press

Life and oil yield. Pretreatment process to meet the requirements of material embryo into juice, it must pass pretreatment process, pre-press machine will directly affect the quality of work

And oil yield.
   If the cake loose weakness, or the cake shapeless, darker color, hand pinch Serve fragments, indicating little billet water; such as the cake soft, into a large

Like, or an increase of the oil bubble, then said Minga too much water. Under normal circumstances, no residue or between the rows round little slag, the slag in the row at the bar, such as the form of fine slag

Chip Description more water, the powder residue indicates less water. In addition, changes in position to see the oil squeezed out of water is appropriate, when squeezed into the water is too high or too

Low, the oil location are backward.
   During operation should always check the oil equipment cake out of the situation and control the moisture billet is neither too high nor too low. Normally the cake should be flaky, by pressing

Screw shaft side smooth, the other side has a lot of hair pattern.
   Oil entering the processing plants contain some impurities (sand, gravel, iron, etc.), if not carefully cleaning, will accelerate the wear of internal parts oil press, descending

Low oil yield, and even cause malfunctions and accidents. Its supporting equipment: cleaning sieve, stone machine, magnetic separator, etc. For shelled oil, should peel after

Re-pressing, this can increase the production capacity and oil yield. Its supporting equipment: Sheller, separation sieve, separating machines. Some oils can Zhengliao

Into juice, but after crushing, flaking and then squeezed, can significantly improve the oil yield. Its supporting equipment: crushers, flaking machines. 

没有评论:

发表评论