At the start of the press can not be too fast feed

After the normal load , about 50kg ready rapeseed or soy , ready to put into the hopper . Note: When you start squeezing feed not too fast, otherwise the sudden increase in pressure within the bore virgin , virgin not turn the screw shaft , causing blockage virgin bore , machine for pellets squeeze cage rupture, a major accident . So at the beginning of the compression , the feed should be evenly slowly into the hopper , so press be run together . So repeatedly , sustained more than 3 ~ 4h , so press the temperature gradually increased, and even take smoke . At the start of the press virgin bore low temperature, can be slowly twist the handle on the withered section stud , increase the thickness of the cake , while improving moisture billet into juice , wire stripping bore temperature. Rose to about 90 ℃, the normal operation of the press , the cake thickness can be adjusted to 1.5 ~ 2.5mm, and tighten the nut tightened.