Wood grinder Features

Timber mill is the use of high-tech advanced technology at home and abroad the latest development of a new type of ultra-fine wood oil equipment, the machine combines a variety of traditional domestic timber mill crushing principle to be innovative, from the traditional kind of crushing principle lumber mill and a variety of home and abroad successfully developed into a set of crushing principle crushing principle as one of the three kinds of energy efficient timber mill, the machine with a fineness analyzer, is specialized in lightweight materials, Briquette machine , brittle materials, ductile materials such as special difficult crushing of the new milling equipment. The aircraft inlet feed using self-priming, forever safe production, replacing the traditional mill direct feed, as well as careless piece of metal into the shortcomings of serious damage to wood flour machine. Machine production of fine, high processing technology, the use of double body, the body of water injection to play the role of water, into a kind of new material, oil processing, heat functions. Therefore, the use of aircraft in the production of noise, no vibration.
Appearance, durable, high yield, than the traditional wood flour machine efficiency is improved by more than 50%, and no grinding equipment can not be replaced ideal milling equipment.

Universal application of Chinese medicine grinder

Universal Chinese medicine grinder for the pharmaceutical, chemical, metallurgy, food, construction and other industries. On hard difficulty grinding materials processing, including plastic, Food dehydrator, herbs, crushed rubber, etc., but also as a micro mill, ultrafine mill processing equipment before the procedure. It combines a fully enclosed powder chamber silencer structure, can effectively reduce operating noise. Machines are installed memory cooling device so that machine temperature decreased, work more smoothly, the machine motor speed 5000 rev / min. The machine adopts Icr18Ni9Ti stainless steel, with strong corrosion resistant characteristics suitable for processing high and corrosive materials. The machine adopts impact crusher method, the material into the crushing chamber, there have been oil processing rotation of the six activities impact hammer, the ring gear and material collision and grinding, the material was crushed with the help of the air flow through the sieve into the Sheng powder bags, leaving no residue. With high efficiency, low noise, reliable performance and product quality, operational safety, health and loss drugs, etc..

Food Dryer Equipment

Food drying machine, also known as mesh belt dryer, it is the material to be processed through the appropriate agency shop materials, such as star distributor, oil equipment, crusher or granulator, located on the conveyor belt, conveyor belt through one or several heating unit comprised of channels, each heating unit equipped with an air heating and circulation system, each channel has one or several humidity system, through the conveyor belt, the hot air from the top down or from the bottom up through the material on the conveyor belt, so that the material can be uniformly dry. Dry food is the use of steel as a transmission belt carrying materials for continuous drying drying equipment, the most suitable assembly line. As the transmission belt is mesh, so the drying various regular or irregular lumps (such as: coal, all kinds of slag forming fast, food, vegetables, etc.) is most appropriate. The unit can and other equipments. Can also be used alone. The device can be widely used in metallurgy, building materials, oil expeller, fertilizers, chemicals and other industries, and the food and vegetable food dryer is ideal for drying processing equipment.
Food microwave dryer is a dryer equipment, but also in recent years with a very wide range of microwave equipment. Food microwave drying machine as a new environmental protection equipment, the use of electricity as an energy source, not only to optimize production efficiency, reduce production costs, but also to improve the working environment workshop is now enterprise equipment upgrades and the best choice for new production lines .

Oil Overview

Production engineering is the process of oil exploration targets under development through the production and injection wells for reservoir engineering and technical measures taken by the general term. As a comprehensive application of discipline, it is the study of cost-effectively act on the reservoir to increase oil production and oil expeller measures in the various engineering theory, engineering design methods and implementation technologies.
Production Engineering's mission is to act on the reservoir through a series of engineering and technical measures to make oil and gas flow freely to wells, wells efficiently be lifted to the ground for separation and measurement; Its goal is to improve the well and cost-effectively oil recovery.
From the viewpoint of system engineering, production engineering is oil exploitation large systems at the center of an important subsystem, reservoir engineering and field gas gathering and transportation engineering are closely linked.
Production Engineering face is different geological conditions and the changing dynamics of various types of reservoirs, and Oil processing the conditions and dynamics of reservoir geology, the right to choose and implement technically feasible and economically reasonable engineering solution in order to obtain good economic results. To do this, they must master a variety of engineering and technical measures to the basic principles of computing and engineering design method, based on a comprehensive comparative analysis.

Production Engineering

 China's current and future will face permeability, heavy oil reservoirs and other difficult to develop Food dehydrator water cut stage reservoir, as well as a range of sea and desert oilfield exploitation issues. With the increase in oil exploration more difficult and technically demanding higher and higher, you must use modern scientific technology to transform traditional mining technology to meet the challenges of the 21st century.
A solution process of oil production technical problems, mechanical, chemical and physical and machine for pellets, which will involve the choice of technology and methods, and even integrated application problems.
In summary, production engineering is characterized by: the status of the entire mining process is very important; problems more difficult, involving a wide range; integrated intensity and targeted; various engineering and technical measures the relative strong independence.

machine for pellets maintenance

1, regular inspection parts, once a month, check the worm, worm, lubricating block bolts, bearings and other moving parts are rotating flexible and wear, find defects should be repaired, not reluctant to use.

2, the machine should be placed on a clean dry machine for pellets, not in the atmosphere contains acids and other corrosive gases on the body circulation places.

3, the machine after use or stopped, remove the rotating drum for cleaning and clearing brush remaining powder will fight, and then properly installed, ready to work for the next use.

4, when the drum ran around in the work place, please adjust the front bearing on the M10 screws Death to the appropriate location. If the gear shaft runout occurs, please adjust the bearing frame behind the M10 screws to the proper position, adjust the gap to the pelleting machine noise does not occur, the hand turn pulleys, elastic appropriate appropriate, are too tight or too loose can make the machine may be damaged .

5, such as disabling a long time, you must wipe clean the machine body, parts of the glossy coated rust oil, cover with a cloth Punta good.

The development potential of enormous machinery industry feed particle machine

In recent years, good  feed pellet mill machine machinery  sales situation, domestic models such as particle machine, feed particle machine, organic fertilizer production line, feed mill, chaff cutter, rubbing machine and dairy machinery such as sales increased significantly, especially the feed particles appeared in short supply situation in the last year. Closely related to the development of animal husbandry, breeding and planting industry with the development of animal husbandry and feed processing machinery industry, but also provides a great chance for the feed processing industry machinery.

According to the market demand, production efficiency, technology supportingprinciple, the former National Machinery Industry Bureau to determine the "fifteen"agricultural machinery industry focus on the development of the four major categories of products, i.e. particle machine, feed particle machine, organic fertilizer production line, feed unit and key parts. Specific to the animal husbandry and feed processing machinery industry, mainly the development of:

Particle machine: now farmers especially some breeding chicken, beef, duckmanagement of dairy cattle breeding feed use particle machine.

pellet making machines: processing feed in some fish farmers also incorporates the use of feed particle machine to reduce the cost of production.

Wood pellet machine flat die and die principle

Flat module wood pellet machine principle: the XY series flat die wood pellet machineis in a circular motion into rotary foundation, motor

(some place where there is no power resources, sufficient can use diesel) as the equipment running power, rotate the pulley / gear, the driven equipment spindle,spindle peace die disc rotation, under the effect of friction drag, pressing wheel devicerelative operation began, extrusion material, the raw material is extruded into what wewant specifications. To the different length of finished products, can adjust theposition of the cutter to achieve. After making a series of products, in the material throwing disc thrown out under the action of the force, arrived at the discharge port,complete the processing.

The working principle of ring die wood pellet maker :the material from the inlet to thechat basin, under the action of centrifugal force, the material being thrown to the wall surface of ring die pellet machine film, forming an annular layer of uniform, an annular layer to be brought into the film and the roller contact surface, through mutualextrusion pressure membrane and roller, the raw material is extruded, to achieve the required specifications, adjust the cutter location, determine the length of the finished product will be produced, uniform particle growth presented in front of us.

showing the importance of speculation in oil extraction process materials

Fried materials directly affect the quality of the oil and oil yield , the " squeeze -third , seven fried stuff" argument , showing the importance of speculation in oil extraction process materials , and the key material in speculation seed quality fried machines and apparatus . Briquetting machine hydraulic press machine gear , all models are installed vibration noise reduction device , thicker plates and fried bore volume , available a variety of heating fuel heating ( coal , electricity, gas , firewood , etc. ) , extensive heat , fried and fast material design, greatly improving the life and fried fried feeder seed quality, but also equipped with a fuel temperature indicator, inverted switch energy and other advanced devices , potato peeler machine, high degree of automation . The novel mechatronic design scientific and reasonable structure, easy to operate, safe and stable, fully automated device to expect from the finished product a few minutes to complete .

Extract feed adjustment board

Usually the body temperature of 70-80 degrees Celsius, before commencing crushing.when the press: should slowly adjust cake thickness, oilseeds varieties, press the number of times is different, Briquetting machine  control of the cake thickness 0.25-0.5 mm. When the That job satisfaction, you can flip the hand lever locking adjustment nut to increase the feed to the normal feed rate. If the cake sluggish or stops the cake, you should stop feeding, Taking the feed adjustment board, exclude inlet deposit material, and  oil expeller  withdraw the spindle, clear virgin bore obstruction. Pressed sesame, peanuts and other oil yield higher Oil, you can even squeeze two or three times in batches, each batch of 5 kg is appropriate.

granulator Precautions

1, granulation confidential forward operation; avoid reversed.
2, granulating machine prohibit empty machine without load operation, you must heat feeding operation,  Briquette machine  avoid sticky bar (axle) phenomenon.
3, granulating machine feed inlet air vent is prohibited to enter the iron and other debris. Avoid unnecessary accidents, affecting the normal production safety.
And pay attention to changes in body temperature, with clean hands when touching left the note, immediately warming. Until sliver left the normal.
4, reducer bearing parts burned hands, or when accompanied by noise timely maintenance should be shut down, and added fuel.
5, the host ends bearing parts bearing chamber burning hot hands or noisy, to downtime and butter filling. For normal  oil equipment , the bearing chamber every 5-6 days
6, attention to find out the machine's operating rules; such as: machine high and low temperature, speed speed, under the circumstances, the timely processing.
7, the fuselage unstable operation, should be careful to check the coupling gap is consistent tight to loosen some time.

Pressure plate combined with concrete

Pressure plate for industrial plant roof, siding when no insulation requirements in the general case,  Briquette machine  meter of steel is about 5 to 11 kg. There insulation requirements, the available mineral wool board, glass wool, foam, etc. for insulation. Pressure plate combined with concrete made of composite slabs, eliminating the need for formwork and as a load-bearing structure. Meanwhile pressure plate and concrete to strengthen the binding force, should be pre-welded on steel studs or oppression bidirectional stiffeners.
Color pressure plate is the use of color coated steel, cold-formed by roll into a variety of wave type pressure plate, it applies to industrial and
Civil, Warehouse,  oil processing , large span steel structure housing of the roof, walls and interior and exterior decoration, a lightweight, high strength, color-rich, convenient construction, earthquake, fire, rain, long life, maintenance-free characteristics, is now widely used.

Straw briquetting machine structural characteristics

Straw briquetting machine is mainly used for processing straw, Briquette machine, peanut shells, corn cobs and other crop stalks and other waste, can also be used for processing twigs, bark, sawdust and other waste and special equipment.
Straw briquetting machine flat ring die die form, its structure characteristics: First, motor driven spindle rotation reducer drive, and then to drive the roller rotating spindle, machine for pellets, easy maintenance; second is between the pressure roller and die radial clearance easy to adjust, can guarantee two rollers between the die and the most appropriate clearance; Third down additional electric heating ring, the ring mold can be heated, is conducive to material molding.

Saving and environmentally friendly plastic granulator

In the era of energy saving backdrop, waste plastic recycling cries constantly increasing, plastic granulator is also increasing demand, industry experts said, due to recent global petrochemical industry has been developing extremely rapidly, plastic granulator rapid increase in demand, has broad prospects for development.Briquette machine the grim energy and environmental issues become more and more plastic granulator future large-scale, and the user of the unit's mechanical stability and energy saving requirements are also increasing.
   Plastic granulator process contamination is often an important source of environmental pollution in China. The most widely used in various types of conventional plastic granulator equipment, there are more than three-quarters of hot plastic granulator, plastic granulator equipment such environmental pollution is very serious.
  Progressive plastic granulator process energy machine for pellets and prevention of environmental pollution are complementary. Reduce 100 million tons of standard coal in energy consumption can be reduced in China more than 64 million tons of CO2 and SO2 emissions, its environmental benefits are clear. Improve energy saving plastic granulator has been very urgent requirement for the transformation of plastic pelletizing systems has become an important issue to be solved.

Feed mill technology

A grinder should be designed to meet the requirements of this standard. 2 of each part should be solid and reliable connection mode, to ensure that no such situation arising due to vibration loosening. 3 Briquette machine 3.1 exposed rotating parts must have guards, mesh guards shall ensure that any part of the body does not touch rotating parts. 3.2 Anti-Protection devices should have sufficient rigidity to ensure that the body does not produce distortion when touched or displacement. 4 port 4.1 feed green artificial feeding, roughage (grass, water lettuce And other aquatic classes and wheat straw, corn stalks, straw and other potato vine, rattan) mill feed hopper length of not less than 500mm; feed hopper platform height should be Is 700mm-1100mm. 4.2 Artificial feeding of cereals (wheat, soybeans, corn, machine for pellets, dried, crushed soybean meal, etc.) should be installed mill material flow can be controlled Particle hopper. 4.3 system must be equipped with automatic feeding the shredder to prevent foreign objects into the crushing chamber magnetic metal protective device. 4.4 Artificial feeding of powder Crusher feed the mouth should "reach into the grinder work strictly prohibited," the warning signs. 5 mill grinding chamber should be fitted in the open door or crushing chamber door is not Closed in place, ensure that the motor can not start interlock device (used alone power is less than 18 5kW small grinder is not specified, but the manufacturing units Should be made ??in the manual clear warning). 6 grinder should overload protection device, grounding flag. The factory used alone unworthy electrical control Box small mill, manufacturing units should be explained in the manual. 7 mill shell and exposed parts shall be designed to avoid wounding with Yi The acute angle, Lee edges. 8 grinder should be prominently marked on the steering shaft. 9 electrical control box and the motor should be reliable grounding measures. The factory is not With a small grinder motor manufacturing unit in the manual should be made clear warning instructions.

Dryer Market

In recent years, with the economic development and technological advances, our dryer industry achieved great development, companies increasingly focus on technology innovation and Briquette machine new products to meet market demand, and from the visible, dryer industry has a huge room for improvement.
 Dryer is a washing machine in one, generally after washing dehydration, used to remove clothing and oil processing in the water, mainly used in mineral processing,Building materials, metallurgy, chemical industry and other departments drying certain humidity or granularity of the material. At present, our main export rotary drum dryer drying equipment products are vibrating, really Air drying equipment, small grain, food and forestry tou drying equipment, the annual export volume of more than a few hundred units, exports are the main areas of Southeast Asia Other developing countries, and has opened the door to European and American markets.  It is understood that eighteen greatly Dryer industry a blueprint to guide the direction and clear requirements, and made plans. Looking to the future, Dryer Further rapid development needs urgent potential, conditions are favorable prospects, still in the golden period of development.

Calcium rotary tabletting machine

 1, the upper half of the machine tablet structure: It consists mainly on the red, the mold, the undershoot three parts fused evenly around 19 pair dies On the edge of the turntable, the upper and oil processing at a fixed end of the curve embedded rail, when the turntable rotates, the upper and lower punches that, as guide rails for the lifting curve Movement to achieve the tabletting purposes.
 2, the main work process is divided into: ⑴ filling; ⑵ tablet; ⑶ the film. Three successive procedures, filling and tabletting the adjustment control mechanism, with a table Licensing instructions, ease of operation.
 3, Briquette machine adopts the flow gate type feeding mechanism, make the material evenly fill the mold hole, reducing the tablet weight difference.
 4, the motor mounted on the frame, the V-belt drag the worm drive turntable and device CVT pulley on the motor shaft, the motor moves through Move, the speed can be adjusted, the use of safe and reliable without noise.
 5, the base of the side with smoke powder boxes, including blowers, Chu powder room, filter powder room, when the machine is running at high speed, resulting in mold powder and fly fall of Powder pink mouth by suction exclusion, without bond plugged maintain smooth operation normally.

standing seam roofing system closure

Features:
a. Unique hidden bracket installation, system surface without screws, brackets and a link to the slip oil processing unique design to overcome the long plate and mounting bracket as thermal expansion and contraction resulting displacement.
b.360 degrees occlusal male and female standing seam ribs, coating equipment can provide professional Briquette machine, is the system in the same system with excellent waterproof performance.
c. choose from a variety of metal materials repression, and provides a variety of life with the same accessories.
d. process-oriented equipment box-type shipping, professional skills, large-scale projects to ensure precise spot repression.

industrial dewatering machine Main technical characteristics

industrial dewatering machine Main technical characteristics:
◆ a three foot hanging structure, with good shock effect.
◆ axis starting with the Briquette machine of structure, liner when it starts getting gradually accelerated, may overload the motor.
◆ Main components imported high quality stainless steel, durable.
◆ liner through balance correction, oil processing, safe and reliable.
◆ smooth braking, high dewatering rate and easy operation.

Preparation of EOR petroleum sulfonate

Petroleum sulfonate is a crude oil or fractions rich sulfonated aromatic product obtained aromatic compounds whose main component is a single salt, which has an aromatic ring with one or several five-membered ring fused together, there are two aromatic ring with one or more five-membered ring fused together, compared to the rest of aliphatic hydrocarbons and alicyclic hydrocarbons sulfonated or oxide. Briquette machine the main use sulfonation, there were three kinds of preparation: white oil production byproduct France? Sulfonated crude sulfonation method and the two-step method. (1) white oil production by-products method. In the production of white oil refining using sulfonation process, removal of aromatic hydrocarbons in the feedstock oil and other active ingredients, is the main product is a mineral oil and oil refinery, in the water phase is mainly petroleum sulfonate. Such petroleum sulfonate average relative molecular mass between 400 and 580 for over sulfonate. Flooding EOR used as a surfactant required, the need for a certain degree of modification. (2) crude sulfonation. Generally having a boiling point of 210 ~ 500 ℃ reduction in second distillate as a raw material, the direct use of sulfur trioxide or fuming sulfuric acid sulfonation, and then the obtained alkali alkyl aryl sulphonates. The method of using the raw oil refining production petroleum sulfonate, its treatment process for the heavy - Distillation - hydrogenation - furfural refining - sulfonated - and in other procedures. The petroleum sulfonate prepared sulfonated crude product performance with different nature are very different. High aromatic content naphthenic crude oil, petroleum sulfonate production byproducts less easy to obtain with the formation of ultra-low interfacial tension of oil processing; while paraffin base crude oil aromatics content, the production of by-products of petroleum sulfonate up to 60% , high production costs, in terms of economic and process by-products is limited. (3) two-step sulfonation. First, the Act of crude oil in the catalyst reacts with SO2 and Cl2, the crude oil alkane sulfonyl chloride generated, then SO3 sulfonation of aromatic hydrocarbons in the crude oil to generate sulfonated aryl sulfonates, obtained by NaOH. alkyl sulfonates and aryl sulfonates. Advantage is that the entire fraction can generate oil sulfonates, sulfonated integrated conversion rate of 70% or more, reducing by-products, reducing costs. Petroleum sulfonates prepared above three method of standard products concentrate active matter content is generally 60% to 63%, about 35% of saturated hydrocarbons, about 2% to 5% moisture content. But it can be made up to 80% active matter content, and as 30% of the products used directly.