Feed mill technology

A grinder should be designed to meet the requirements of this standard. 2 of each part should be solid and reliable connection mode, to ensure that no such situation arising due to vibration loosening. 3 Briquette machine 3.1 exposed rotating parts must have guards, mesh guards shall ensure that any part of the body does not touch rotating parts. 3.2 Anti-Protection devices should have sufficient rigidity to ensure that the body does not produce distortion when touched or displacement. 4 port 4.1 feed green artificial feeding, roughage (grass, water lettuce And other aquatic classes and wheat straw, corn stalks, straw and other potato vine, rattan) mill feed hopper length of not less than 500mm; feed hopper platform height should be Is 700mm-1100mm. 4.2 Artificial feeding of cereals (wheat, soybeans, corn, machine for pellets, dried, crushed soybean meal, etc.) should be installed mill material flow can be controlled Particle hopper. 4.3 system must be equipped with automatic feeding the shredder to prevent foreign objects into the crushing chamber magnetic metal protective device. 4.4 Artificial feeding of powder Crusher feed the mouth should "reach into the grinder work strictly prohibited," the warning signs. 5 mill grinding chamber should be fitted in the open door or crushing chamber door is not Closed in place, ensure that the motor can not start interlock device (used alone power is less than 18 5kW small grinder is not specified, but the manufacturing units Should be made ??in the manual clear warning). 6 grinder should overload protection device, grounding flag. The factory used alone unworthy electrical control Box small mill, manufacturing units should be explained in the manual. 7 mill shell and exposed parts shall be designed to avoid wounding with Yi The acute angle, Lee edges. 8 grinder should be prominently marked on the steering shaft. 9 electrical control box and the motor should be reliable grounding measures. The factory is not With a small grinder motor manufacturing unit in the manual should be made clear warning instructions.