Ring die pellet machine and flat die different particle machine

1, the feeding way. The ring die wood pellet machine feeding mode is mechanicalfeed, a little obsessive, material

The distribution is not uniform, want to achieve uniform distribution, need to use theknife to achieve. Uniform distribution and smooth feeding mode wood pellet machine is by raw material weight vertically into a better efficiency,.

2, discharging mode: Die belong to high speed, high breakage rate of material is discharged; and the flat die belongs to the low speed, damage rate

Low.

3, pressure: in the mold of the same diameter, ring molding wheel diameter is governed by the size of the ring die diameter limit, the

The pressure limited size; flat pressing wheel diameter is not affected by the die diameter limit, can increase the inner bearing space, enhance the ability to withstanda large selection pressure wheel bearing, not only improve the roller pressing force,but also prolongs the service life.

4, pressure wheel adjustment: ring die pelletizer if the adjusting pressure with two screws eccentric roller intermediate;

The flat die granulator is adopt screw thread column M100 center adjusting mechanism, the pushing force of 100 tons, drop steadily, touch soft, uniform pressure.The rotary manual and hydraulic automatic control in two ways. Through the above introduction, we die and flat die pellet machine's working principle, have some of thesame has relevance, not necessarily circular mould pellet machine is not good, butthe characteristics of the raw materials of different particle types, should choose thedifferent.