The difference between ring die pellet machine and flat mode particles machine
One, the feeding way: ring die pelletizing machine adopts mechanical force feeding,high speed rotating centrifugal distribution into the granulation chamber, the scraperto distribution of material, feeding is uneven; the flat die granulator is to rely on the self weight of the materials vertically into a pressing chamber, capable of uniform feeding.
Two, pressure: in the mold of the same diameter, ring molding wheel diameter is governed by the size of the ring die diameter limit, so the pressure limited size; flatmolding wheel diameter is not affected by the die diameter limit, can increase theinner bearing space, choose a large Zhou Chengzeng fought wheel bear ability, not only increase the pressure wheel pressing force, but also prolongs the service life.
Three, discharging mode: Die belong to high speed, high breakage rate of material is discharged; and the flat die belongs to low speed, low breakage rate.
Four, pressure wheel adjustment: ring die pellet machine if the adjusting pressure with two screws on the center of the eccentric wheel; the flat die granulator is adopt screw thread column M100 center adjusting mechanism, the pushing force of 100tons, drop steadily, touch soft, uniform pressure. The rotary manual and hydraulicautomatic control in two ways.