rotating shaft pressing screw oil press

(1) after the shutdown, rotating shaft pressing screw oil press, squeeze the juice from the bore draw screw, and then with a diameter of 24 mm thick iron bar into the end of the compression nut pie hole Inside, loosening the compression nut, then loosen oil press squeeze cage racks and connector ends with the four M16 connection screws connecting the upper and lower squeeze cage removed 10 M14
Bolts, remove the screw on the cage to the garden rows and rows of rings out.
(2) Removing the oil press of rows: Remove  oil equipment  Pai circle at one end with iron bars from the side against a row of hand percussion hammer the other end, one of the Row play, the rest of row is automatically loose down.
(3) Article row assembly method: oil press row circle of standing to bring out the tank facing down, put the following piece of wood, the pieces are arranged in neat rows tune of row ring Wall, with deep sump end down. Two similar pieces in front row deep groove surface can not  oil refinery  together, the last row of the oil press against the plug with a metal rod Protruding end of the closed beta, hand percussion hammer the other end of the strip row close to the wall, to touch the inner wall without protruding phenomenon so far.