2013年7月18日星期四

A rotary tableting machine structural characteristics calcium

 1, the upper half of the machine tablet structure: It consists mainly on the red, the mold, the undershoot three parts fused evenly around 19 pair dies

On the edge of the turntable, the upper and lower Oil processing at a fixed end of the curve embedded rail, when the turntable rotates, the upper and lower punches that, as guide rails for the lifting curve

Movement to achieve the tabletting purposes.
  2, the main work process is divided into: ⑴ filling; ⑵ tablet; ⑶ the film. Three successive procedures, filling and tabletting the adjustment control mechanism, with a table

Licensing instructions, ease of oil expeller.

  3, The machine adopts the flow gate type feeding mechanism, make the material evenly fill the mold hole, reducing the tablet weight difference.

   4, the motor mounted on the frame, the V-belt drag the worm drive turntable and device CVT pulley on the motor shaft, the motor moves through

Move, the speed can be adjusted, the use of safe and reliable without noise.

   5, the base of the side with smoke powder boxes, including blowers, Chu powder room, filter powder room, when the machine is running at high speed, resulting in mold powder and fly fall of

Powder pink mouth by suction exclusion, without bond plugged maintain smooth operation normally.

1 条评论:

  1. Very Good informative site for tablet machineries, capping & packing machines india.
    Tablet Machines
    Tablet Capping & Packing Machines

    回复删除