2013年7月24日星期三

Wood flour solutions to common problems

Wood powder machine solutions to common problems: wood flour machine by prolonged use may occur such problems. Oil processing problems can affect our normal production. We need to carry out maintenance on machinery, today we give you to tell us about the wood flour machine solutions to common problems.
If there is a rivet hole prone to fatigue cracking the case, can one have not used the new electrode for welding repair cracks, but to the impeller axis of symmetry for the central, while the rest of the crack at welding electrodes remain there, and then a new patch electrode symmetrical rivet hole cracks after welding electrode with the rest of the symmetrical rivet welding repair as long as the rest of the time, Food dehydrator ensure equal weight up welding. If symmetrical rivet holes should be no cracks in the electrode surfacing here, used to offset symmetrical rivet holes fill welding crack at new weight. By the symmetry re-fill method can be used to repair welding cracks.
The rivet head was facing the impeller wear this common problem, we can compress the hub of the impeller body with welding surfacing worn by this method allows the rivet head back to the normal state.
Should regularly perform simple impeller balancing test, Pellet mill, method is also very convenient. First of all necessary support from the impeller, and then struck so gently rotate your hand, if you have to reach a balanced place will stop and swing around to the lowest point. If there is a place emphasis on the impeller in the opposite spot, adding weight to make it balanced, you can also use angle grinder rubbed emphasis impeller welding marks, which can achieve balance, so you can put the fan repaired for normal work the. Very tips of the fan in the repair process can not use random spot welding, and welding marks will be left to the impeller, causing the fan impeller imbalance, reach the purpose of repairing wood flour machine, resulting in their greater losses .

没有评论:

发表评论