The use of hydraulic press

(1) according to the different fuel, master cake squeezed into billet temperature and Oil machine content.

(2) When pressed on the top plate next to lowest position, loosen the tie rod nuts activities, unplug the two active pins, turning activities lever on the side. Cake

Turn into the pressing chamber, will be active lever back in situ fixation, the first pre-press to see the oil lasts processing and preservation, return the piston, the remaining cake for being loaded

Presses (general hydraulic press can hold cake 20).

(3) when the pressure squeezing the handle when light pressure ground pressure, force should be uniform, and not too hard, otherwise prone to accidents.

(4) crushing the high oil content of oil (such as peanut, rapeseed), pressing the first pass when the first low-pressure pump, the oil pressure pump after the switch to

(5)Briquette machine work such as found in the pressure gauge pointer back to less than zero, it should promptly check, repair or replacement.

(6) Open the return valve, the oil will automatically back into the tank, the piston automatically fall, you can unload virgin.